That it concerns low beam, high beams or turn signals, the bulb replacement is a very operation simple to execute . But if a fire never works, you shouldn't delay changing it. Because some people forget it, but it remains punishable by a fine of up to 68 euros. Obviously, it is necessary to first repair them for safety reasons. Here is therefore how to replace the headlight bulb on the Toyota Hi Ace, step by step. Second, we will find out how to properly adjust them.changing-headlight-bulb-Toyota-Hi-Ace

How to change the bulb of a Toyota Hi Ace headlight

Nowadays, there are various types of headlight bulbs. The most common are halogen , however there are also Xenon , slightly put on the side now, and lots of bulbs LED . The latter consume less energy and are more robust. No matter what kind of bulb, the way to change them will be similar. You will find below the procedure to follow for replace the bulb in your Toyota Hi Ace .

  • Disconnect the battery in order to work more serenely.
  • Free access to the rear part of the light. Sometimes it will be necessary to remove the battery, or else covers.
  • Remove the rubber or plastic cover on the back of the light
  • Unclip or unscrew the broken bulb of your Toyota Hi Ace
  • Compare it well with the new one to make sure it is suitable
  • Put the new bulb down gently, then fix it properly
  • Reclip the rubber cover and all components in the opposite direction

Now that everything is in place, check that it works! The latter should have the same intensity as the other. It is important to have completely similar products.

How to adjust the headlights of a Toyota Hi Ace

Now that the fire is in place, it is plausible that the latter is out of order. It is extremely important that two lights at the same height and in the same axis. In particular not to annoy the conductors opposite. It is therefore advisable to take the time to settle them properly. To do this, simply place your car facing a wall. First a meter from the wall, then 5 or 6 meters. Second, just set the light in question to the same height as the other by comparing the halos. If neither goes, there are very good tutorials on this.