Whether it's about the low beams, high beams or turn signals, the changing a light bulb is a super operation simple to perform . But when a fire does not work, it should not be long to repair it. Because many forget it, but it is reprehensible by a sanction which can go up to 68 euros. Of course, it will first have to be changed for security reasons. This is how you can replace the headlight bulb on your Toyota Highlander, point by point. Second, we will find out how to set them correctly.
How to Replace a Toyota Highlander's Headlight Bulb
Today there are several types of headlight bulbs. The most common are halogen , however there are also Xenon , somewhat put on the side today, and more and more light bulbs LED . These are less energy consuming and more robust. Whatever the type of bulb, the way to replace them will be similar. Here is the procedure to follow for replace the bulb in your Toyota Highlander .
- Disconnect the battery to work more comfortably.
- Free access to the rear portion of the fire. It will sometimes be necessary to disassemble the battery, or covers.
- Remove the rubber or plastic cover behind the fire
- Remove the fixing or unscrew the defective bulb from your Toyota Highlander
- Compare it well with the new one to be sure it fits
- Place the new bulb gently, then fix it correctly
- Replace the rubber cover and all the components, following the reverse procedure
Now that everything is in order, check that it works! This should have an intensity similar to the other. It is essential to have totally similar products.
Adjusting the headlights of a Toyota Highlander
Now that the fire is in place, it remains plausible that the latter is out of order. It is very important that two lights at the same height and focused the same way. In particular so as not to obstruct the conductors in the other direction. It is therefore advisable to take the time to adjust them correctly. To do this, you just have to position your automobile facing a wall. First a meter from the wall, then a few meters. Secondly, just adjust the light with the new bulb to the same height as the other by comparing the halos. If the two are wrong, there are tutorials that can help.