Whether it's about the low beams, high beams or turn signals, the changing a light bulb is a very repair convenient to perform . But if a fire never stops working, you should not wait to repair it. Because many ignore it, but this remains punishable by a fine of up to 68 euros. Obviously, they must first be changed for security reasons. So that's how to change the bulb of a headlight on a Toyota Hilux 2, step by step. In a second step, we will see how to properly adjust them.changing-headlight-bulb-Toyota-Hilux-2

How to replace the bulb of a Toyota Hilux 2 headlight

Today there are various types of headlight bulbs. The most common are halogen , however there are also Xenon , slightly put on the side today, and a lot of bulbs LED . The latter consume less electricity and are more robust. Whatever the type of bulb, the way to replace them will be similar. So that's the logic to follow for change the bulb in your Toyota Hilux 2 .

  • Disconnect the battery in order to work more serenely.
  • Clear access to the rear part of the light. At times it will be necessary to disassemble the battery, or else covers.
  • Remove the rubber or plastic cover on the back of the fire
  • Unclip or unscrew the broken bulb of the Toyota Hilux 2
  • Compare it well with the news to make sure it fits
  • Position the new bulb gently, then fix it properly
  • Reclip the rubber cover then all the components following the reverse procedure

Now that everything is in order, test the bulb! The latter should have an intensity equal to the other. It is essential to have perfectly similar products.

How to adjust the headlights of a Toyota Hilux 2

Now that the fire is in place, it is plausible that it is out of order. It is very important that two lights at the same height and focused the same way. Among other things so as not to obstruct the conductors in the other direction. That is why they must be settled properly. For this, you must place your car in front of a wall. To start one meter from the wall, then 5 or 6 meters. In a second step, it is enough to adjust the fire with the new bulb at the same height as the other by comparing the halos. If the two are wrong, there are tutorials that can help.