That it concerns low beam, high beams or turn signals, the changing a light bulb is a super repair convenient to do . But if a fire never works, you should not wait to repair it. Because some people forget it, but this is condemnable by a fine which can go up to 68 euros. Obviously, you will first have to change them for safety reasons. So that's how to change the headlight bulb on the Toyota Hilux 3, step by step. Next, we will find out how to set them correctly.changing-headlight-bulb-Toyota-Hilux-3

How to replace the bulb of a Toyota Hilux 3 headlight

Now there are several types of headlight bulbs. The most common are halogen , but there are also Xenon , a little put on the side now, and a lot of bulbs LED . The latter consume much less electricity and are more robust. Regardless of the type of bulb, the way to replace them will be similar. Here is the logic to follow for change the bulb in your Toyota Hilux 3 .

  • Disconnect the battery in order to work more serenely.
  • Free access to the rear portion of the fire. From time to time it will be necessary to remove the battery, or covers.
  • Remove the rubber or plastic cover on the back of the fire
  • Unclip or unscrew the defective bulb from your Toyota Hilux 3
  • Compare it with the new one to make sure it fits
  • Place the new bulb gently, then fix it properly
  • Reclip the rubber cover and all of the components, following the reverse procedure

Now that everything is in place, check that it works! The latter should have an intensity equal to the other. It is essential to have perfectly similar products.

How to set the headlights of a Toyota Hilux 3

Now that the fire is in place, it is plausible that it is out of order. It is very important that two lights at the same height and in the same axis. In particular not to annoy motorists opposite. That is why they must be set correctly. To do this, simply position your car in front of a wall. First a meter from the wall, then a few meters. Thereafter, it is enough to regulate the fire with the new bulb in the same way as the other according to the reflections on the wall. If neither goes, there are very good tutorials on this.