Whether it's for low beam, high beams or turn signals, the bulb replacement is a very repair simple to execute . But if a fire does not work, do not wait to repair it. Because many forget it, but this is condemnable by a penalty which can go up to 68 euros. Of course, it is necessary to start changing them for safety reasons. Here is therefore how to change the bulb of a headlight on a Toyota Hilux 4, point by point. Then we will see how to correctly adjust them.
How to change the bulb of a Toyota Hilux 4 headlight
Today there are various types of headlight bulbs. The most common are halogen , however there are also Xenon , slightly put on the side today, and a lot of bulbs LED . These are less energy consuming and more robust. Whatever the type of bulb, the way to change them will be similar. Here is the logic to follow in order to change the bulb in your Toyota Hilux 4 .
- Disconnect the battery to work more comfortably.
- Free access to the rear portion of the fire. It will sometimes be necessary to remove the battery, or else covers.
- Remove the rubber or plastic cover on the back of the light
- Remove the fixing or unscrew the defective bulb from the Toyota Hilux 4
- Compare it well with the news to make sure it fits
- Position the new bulb gently, then fix it correctly
- Reclip the rubber cover and all of the components, following the reverse procedure
Now that everything is back in order, check that it works! The latter should have the same intensity as the other. It is essential to have perfectly identical models.
How to adjust the headlights of a Toyota Hilux 4
Now that the fire is in place, it is plausible that it is out of order. It is very important that two lights at the same height and in the same axis. In particular not to annoy the drivers in the other direction. It is therefore advisable to take the time to adjust them correctly. To do this, simply place your car in front of a wall. First a meter from the wall, then a few meters. Then just adjust the light with the new bulb to the same height as the other by comparing the halos. If neither goes, there are very good tutorials on this.