That it concerns low beam, high beams or turn signals, the changing a light bulb is a very operation convenient to execute . But when a fire stops working, you should not wait to replace it. Because many do not know it, but it remains punishable by a fine which can go up to 68 euros. Obviously, you will have to replace them first for safety reasons. So that's how to change the headlight bulb on your Toyota I-unit, point by point. Then we will see how to set them correctly.
How to change the bulb of a Toyota I-unit headlight
Today there are various types of headlight bulbs. The most common are halogen , however there are also Xenon , somewhat neglected now, and more and more light bulbs LED . They consume less electricity and are more enduring. Whatever the type of bulb, the way to change them will be similar. You will find below the procedure to follow for change the bulb of your Toyota I-unit .
- Disconnect the battery to work more comfortably.
- Free access to the rear portion of the fire. Sometimes it will be necessary to remove the battery, or covers.
- Remove the rubber or plastic cover on the back of the fire
- Remove the fixing or unscrew the defective bulb from the Toyota I-unit
- Compare it with the new one to make sure it matches
- Position the new bulb gently, then fix it correctly
- Replace the rubber cover then all the elements following the reverse procedure
Once everything is in order, test the bulb! This should have an intensity similar to the other. It is essential to have completely identical products.
How to adjust the headlights of a Toyota I-unit
After replacing a light, it is possible that it will be out of order. It is very important that two lights at the same height and focused the same way. In particular not to disturb the conductors opposite. They must therefore be set correctly. To do this, you just have to place your vehicle in front of a wall. First a short distance, then a few meters. Then, you just have to adjust the fire with the new bulb at the same height as the other by comparing the halos. If neither goes, there are tutorials that can help.