Whether it's about the low beams, high beams or turn signals, the bulb replacement is an extremely manipulation convenient to execute . But if a fire does not work, it should not be long before changing it. Because some people ignore it, but it remains condemnable by a fine of up to 68 euros. Of course, it is necessary to first replace them for safety reasons. Here is how to replace the headlight bulb on the Toyota Land Cruiser Sw Serie 60, step by step. In a second step, we will find out how to properly adjust them.change-headlight-bulb-Toyota-Land-Cruiser-Sw-Serie-60

How to replace the bulb of a Toyota Land Cruiser Sw Serie 60 headlight

Nowadays, there are several types of headlight bulbs. The most common are halogen , however we can also find Xenon , somewhat put on the side today, and more and more light bulbs LED . They consume much less energy and are more enduring. Whatever the type of bulb, the way to replace them will be similar. You will find below the logic to follow for replace the bulb in your Toyota Land Cruiser Sw Serie 60 .

  • Disconnect the battery in order to work more quietly.
  • Free access to the rear part of the light. Sometimes it will be necessary to remove the battery, or else covers.
  • Remove the rubber or plastic cover on the back of the light
  • Remove the fixing or unscrew the damaged bulb from the Toyota Land Cruiser Sw Serie 60
  • Compare it well with the new one to make sure it is suitable
  • Place the new bulb gently, then fix it properly
  • Reclip the rubber cover and all the components in reverse

Now that everything is in place, check that it works! The latter should have an intensity similar to the other. It is essential to have perfectly similar models.

How to set the headlights of a Toyota Land Cruiser Sw Serie 60

After replacing a light, it is possible that it will be out of order. It is very important that two lights at the same height and in the same axis. Among other things so as not to disturb the drivers you meet. That is why we must take the time to settle them properly. To do this, simply position your automobile facing a wall. To start a short distance, then a few meters. In a second step, you just have to adjust the fire with the new bulb in the same way as the other according to the reflections on the wall. If neither goes, there are very good tutorials on this.