That it concerns low beam, high beams or turn signals, the bulb replacement is a super manipulation easy to execute . But if a fire never works, you should not wait to replace it. Because some people ignore it, but it is condemnable by a sanction which can go up to 68 euros. Of course, it will first have to be repaired for safety reasons. So that's how to replace the headlight bulb on a Toyota Mirai, step by step. Then we will see how to properly adjust them.changing-headlight-bulb-Toyota-Mirai

How to change the bulb of a Toyota Mirai headlight

Now there are several types of headlight bulbs. The most common are halogen , but there are also Xenon , somewhat put on the side now, and lots of bulbs LED . These are much less energy intensive and more robust. No matter what kind of bulb, the way to change them will be the same. Here is the procedure to follow in order to replace the bulb in your Toyota Mirai .

  • Disconnect the battery in order to work more quietly.
  • Free access to the rear part of the light. It will sometimes be necessary to disassemble the battery, or else covers.
  • Remove the rubber or plastic cover on the back of the light
  • Unclip or unscrew the damaged bulb from the Toyota Mirai
  • Compare it with the new one to be sure it is suitable
  • Place the new bulb gently, then fix it properly
  • Replace the rubber cover then all the components in the other direction

Now that everything is in place, check that it works! The latter should display an intensity similar to the other. It is essential to have completely identical products.

Configure the headlights of a Toyota Mirai

After replacing a light, it is possible that it will be out of order. It is extremely important that two lights at the same height and in the same axis. In particular not to disturb the conductors opposite. That is why we must take the time to settle them properly. To do this, you must position your car facing a wall. First a meter from the wall, then a few meters. Then just adjust the fire with the new bulb in the same way as the other by comparing the halos. If the two are poorly adjusted, there are tutorials very well done on this subject.