That it concerns low beam, high beams or turn signals, the bulb replacement is a very repair convenient to perform . But in the event that a light no longer works, it should not be long to change it. Because some people do not know it, but it remains reprehensible by a ticket which can go up to 68 euros. Obviously, they must first be changed for safety reasons. So that's how to replace the headlight bulb on the Toyota Mtrc, point by point. Then we will see how to set them correctly.change-bulb-headlight-Toyota-Mtrc

How to Replace a Toyota Mtrc Headlight Bulb

Today, there are several types of headlight bulbs. The most common are halogen , but there are also Xenon , somewhat put on the side now, and lots of bulbs LED . These are much less energy consuming and more resistant. Regardless of the type of bulb, the way to replace them will be the same. Here is the procedure to follow in order to replace the bulb in your Toyota Mtrc .

  • Disconnect the battery in order to work more quietly.
  • Clear access to the rear portion of the light. At times it will be necessary to remove the battery, or else covers.
  • Remove the rubber or plastic cover on the back of the fire
  • Remove the fixing or unscrew the broken bulb from the Toyota Mtrc
  • Compare it with the new one to make sure it fits
  • Position the new bulb gently, then fix it correctly
  • Replace the rubber cover and all the components by following the reverse procedure.

Now that everything is in order, test the bulb! The latter should have the same intensity as the other. It is essential to have totally similar models.

Configure the headlights of a Toyota Mtrc

After replacing a light, it is plausible that it will be out of order. It is extremely important that two lights at the same height and in the same axis. In particular not to upset the drivers you meet. It is therefore advisable to take the time to adjust them correctly. To do this, simply place your automobile facing a wall. To start a short distance, then 5 or 6 meters. Then just adjust the fire with the new bulb at the same height as the other according to the reflections on the wall. If neither of them goes, we find tutorials very well done on this subject.