That it concerns low beam, high beams or turn signals, the bulb replacement is a super operation simple to do . But when a fire no longer works, it should not be delayed to change it. Because many ignore it, but this is punishable by a fine of up to 68 euros. Obviously, it is necessary to replace them first for safety reasons. So here's how to change the headlight bulb on a Toyota Prius 4, step by step. In a second step, we will see how to properly adjust them.change-headlight-bulb-Toyota-Prius-4

How to replace the bulb of a Toyota Prius 4 headlight

Nowadays, there are various types of headlight bulbs. The most common are halogen , however we can also find Xenon , a little put on the side now, and more and more bulbs LED . They consume less energy and are more resistant. Regardless of the type of bulb, the way to replace them will be similar. Here is the process to follow in order to change the bulb of your Toyota Prius 4 .

  • Disconnect the battery in order to work more serenely.
  • Free access to the rear part of the light. Sometimes it will be necessary to remove the battery, or else covers.
  • Remove the rubber or plastic cover on the back of the light
  • Remove the fixing or unscrew the damaged bulb from your Toyota Prius 4
  • Compare it well with the news to make sure it matches
  • Place the new bulb gently, then fix it properly
  • Reclip the rubber cover then all the components in reverse

Now that everything is back in order, test the bulb! The latter should have a similar intensity to the other. It is essential to have perfectly similar models.

How to adjust the headlights of a Toyota Prius 4

After replacing a light, it remains plausible that it will be out of order. It is extremely important that two lights at the same height and in the same axis. Among other things so as not to upset the drivers in the other direction. They must therefore be properly adjusted. To do this, you must place your automobile in front of a wall. To start with one meter from the wall, then five or six meters. Secondly, you just have to adjust the fire in question in the same way as the other by comparing the halos. If the two are set incorrectly, there are some really well-made tutorials out there.