That it concerns low beam, high beams or turn signals, the bulb replacement is an extremely manipulation convenient to execute . But if a fire does not work, you should not wait to change it. Because many do not know, but this is punishable by a penalty of up to 68 euros. Obviously, they will first have to be changed for security reasons. Here is how to change the bulb of a headlight on a Toyota Proace Verso, point by point. In a second step, we will find out how to set them correctly.change-bulb-headlight-Toyota-Proace-Verso

How to change the bulb of a Toyota Proace Verso headlight

Today, there are several types of headlight bulbs. The most common are halogen , however there are also Xenon , slightly neglected now, and lots of bulbs LED . They consume much less electricity and are more robust. Whatever kind of bulb, the way to change them will be similar. So that's the logic to follow for change the bulb of your Toyota Proace Verso .

  • Disconnect the battery in order to work more serenely.
  • Free access to the rear portion of the fire. Sometimes it will be necessary to remove the battery, or else covers.
  • Remove the rubber or plastic cover on the back of the light
  • Remove the fixing or unscrew the broken bulb from the Toyota Proace Verso
  • Compare it with the new one to make sure it matches
  • Place the new bulb gently, then fix it correctly
  • Reclip the rubber cover and all components in reverse order

Now that everything is back in order, check that it works! This should have an intensity similar to the other. It is important to have completely similar models.

How to adjust the headlights of a Toyota Proace Verso

After replacing a light, it is plausible that it will be out of order. It is very important that two lights at the same height and in the same axis. Among other things so as not to obstruct the conductors in the other direction. So take the time to adjust them correctly. To do this, you just have to place your car facing a wall. To start a short distance, then a few meters. In a second step, you will just have to adjust the light with the new bulb at the same height as the other by comparing the halos. If neither of them goes, there are tutorials that can help you.