Whether it's about the low beams, high beams or turn signals, the changing a light bulb is an extremely convenient to make . But if a fire never stops working, you should not wait to change it. Because many forget it, but it remains condemnable by a sanction which can go up to 68 euros. Of course, they must first be repaired for safety reasons. Here is therefore how to change the bulb of a headlight on a Toyota Rav 4 (3rd Generation), step by step. Second, we will find out how to properly adjust them.change-bulb-headlight-Toyota-Rav-4- (3th-Generation)

How to replace the bulb of a Toyota Rav 4 (3rd Generation) headlight

Now there are a number of types of headlight bulbs. The most common are halogen , but there are also Xenon , a little put on the side today, and more and more bulbs LED . These are much less energy intensive and more enduring. Whatever the type of bulb, the way to replace them will be identical. You will find below the logic to follow for change the bulb of your Toyota Rav 4 (3th Generation) .

  • Disconnect the battery so that you can work more quietly.
  • Clear access to the rear portion of the light. At times it will be necessary to remove the battery, or covers.
  • Remove the rubber or plastic cover on the back of the fire
  • Remove the fixing or unscrew the defective bulb from the Toyota Rav 4 (3rd Generation)
  • Compare it with the new one to be sure it is suitable
  • Place the new bulb gently, then fix it properly
  • Reclip the rubber cover then all the elements following the reverse procedure

Once everything is in order, check that it works! This one should have an intensity equal to the other. It is important to have perfectly similar products.

How to set the headlights of a Toyota Rav 4 (3th Generation)

Now that the fire is in place, it is plausible that it is out of order. It is very important that two lights at the same height and in the same axis. Among other things so as not to annoy the drivers in the other direction. They must therefore be settled properly. To do this, simply place your car in front of a wall. To start a short distance, then a few meters. Secondly, just adjust the fire with the new bulb in the same way as the other according to the reflections on the wall. If neither goes, there are tutorials that can help.