Whether it's about the low beams, high beams or turn signals, the changing a light bulb is a super repair simple to execute . But when a fire doesn't work, you don't have to wait to change it. Because some people ignore it, but this is reprehensible by a sanction which can go up to 68 euros. Naturally, it will first have to be repaired for safety reasons. Here is how to change the headlight bulb on your Toyota Rav 4 (4th Generation), step by step. Second, we will find out how to set them correctly.change-bulb-headlight-Toyota-Rav-4- (4th-Generation)

How to change the bulb of a Toyota Rav 4 (4nd Generation) headlight

Nowadays, there are a number of types of headlight bulbs. The most common are halogen , but there are also Xenon , somewhat neglected today, and many bulbs LED . They consume much less electricity and are more robust. Whatever the type of bulb, the way to change them will be similar. So that's the logic to follow for change the bulb of your Toyota Rav 4 (4th Generation) .

  • Disconnect the battery so that you can work more quietly.
  • Free access to the rear part of the light. Sometimes it will be necessary to remove the battery, or covers.
  • Remove the rubber or plastic cover behind the fire
  • Unclip or unscrew the defective bulb from your Toyota Rav 4 (4th Generation)
  • Compare it with the news to make sure it matches
  • Place the new bulb gently, then fix it correctly
  • Replace the rubber cover then all the elements following the reverse procedure

Once everything is in place, check that it works! The latter should have the same intensity as the other. It is essential to have perfectly identical products.

How to set the headlights of a Toyota Rav 4 (4th Generation)

After replacing a light, it is still possible that it will be out of order. It is very important that two lights at the same height and focused the same way. Among other things so as not to annoy the motorists you meet. It is therefore advisable to take the time to adjust them correctly. To do this, you just have to position your automobile facing a wall. To start one meter from the wall, then 5 or 6 meters. Second, you just have to adjust the fire in question at the same height as the other according to the reflections on the wall. If neither goes, there are very good tutorials on this.