Whether it's about the low beams, high beams or turn signals, the bulb replacement is a super operation easy to execute . But when a fire stops working, you should not wait to replace it. Because many forget it, but it remains reprehensible by a ticket which can go up to 68 euros. Of course, you will first have to repair them for security reasons. Here is how to replace a headlight bulb on the Toyota Rav 4, step by step. Then we will see how to properly adjust them.change-bulb-headlight-Toyota-Rav-4

How to replace the bulb of a Toyota Rav 4 headlight

Today there are various types of headlight bulbs. The most common are halogen , however there are also Xenon , somewhat neglected today, and more and more light bulbs LED . The latter consume much less electricity and are more enduring. Whatever kind of bulb, the way to replace them will be similar. So here is the procedure to follow for replace the bulb in your Toyota Rav 4 .

  • Disconnect the battery in order to work more quietly.
  • Clear access to the rear part of the light. It will sometimes be necessary to remove the battery, or else covers.
  • Remove the rubber or plastic cover on the back of the light
  • Unclip or unscrew the damaged bulb from the Toyota Rav 4
  • Compare it with the new one to be sure it matches
  • Place the new bulb gently, then fix it properly
  • Replace the rubber cover then all the components in the opposite direction

Now that everything is in place, check that it works! This one should have the same intensity as the other. It is important to have completely identical products.

Adjust the headlights of a Toyota Rav 4

Now that the fire is in place, it remains possible that it is out of order. It is extremely important that two lights at the same height and in the same axis. In particular not to annoy the drivers in the other direction. They must therefore be settled properly. To do this, simply place your vehicle facing a wall. First one meter from the wall, then a few meters. Then, you just have to adjust the fire with the new bulb at the same height as the other by comparing the halos. If the two are wrong, there are tutorials that can help.