Whether it's for low beam, high beams or turn signals, the bulb replacement is a very repair easy to make . But if a fire no longer works, do not wait to replace it. Because many forget it, but it remains condemnable by a fine which can go up to 68 euros. Obviously, it is necessary to first change them for security reasons. Here is how you can replace the headlight bulb on your Toyota Tercel, step by step. Secondly, we will see how to correctly adjust them.change-bulb-headlight-Toyota-Tercel

How to change the bulb of a Toyota Tercel headlight

Today, there are a number of types of headlight bulbs. The most common are halogen , but there are also Xenon , somewhat neglected today, and more and more light bulbs LED . These are much less energy consuming and more robust. No matter what type of bulb, the way to change them will be the same. You will find below the procedure to follow for replace the bulb in your Toyota Tercel .

  • Disconnect the battery in order to work more quietly.
  • Clear access to the rear portion of the light. At times it will be necessary to remove the battery, or else covers.
  • Remove the rubber or plastic cover behind the fire
  • Unclip or unscrew the defective bulb from your Toyota Tercel
  • Compare it with the new one to be sure it fits
  • Place the new bulb gently, then fix it correctly
  • Reclip the rubber cover then all the elements following the reverse procedure

Now that everything is in place, test the bulb! This one should have the same intensity as the other. It is essential to have perfectly identical products.

How to set the headlights of a Toyota Tercel

Now that the fire is in place, it remains plausible that the latter is out of order. It is extremely important that two lights at the same height and in the same axis. Among other things so as not to disturb the motorists you meet. That's why you have to take the time to adjust them correctly. To do this, you just have to position your car in front of a wall. First a short distance, then 5 or 6 meters. Second, just set the fire with the new bulb in the same way as the other by comparing the halos. If the two are poorly adjusted, there are tutorials very well done on this subject.