That it concerns low beam, high beams or turn signals, the changing a light bulb is an extremely repair convenient to perform . But when a fire no longer works, you shouldn't wait to replace it. Because some people do not know it, but this remains punishable by a sanction of up to 68 euros. Of course, they must first be replaced for safety reasons. Here is therefore how to change the bulb of a headlight on a Toyota Tundra, point by point. Second, we will find out how to properly adjust them.change-headlight-bulb-Toyota-Tundra

How to change the bulb of a Toyota Tundra headlight

Nowadays, there are several types of headlight bulbs. The most common are halogen , however there are also Xenon , a little put on the side now, and a lot of bulbs LED . These are much less energy intensive and more robust. Regardless of the type of bulb, the way to change them will be the same. Here is the procedure to follow for change the bulb of your Toyota Tundra .

  • Disconnect the battery so that you can work more serenely.
  • Clear access to the rear part of the light. At times it will be necessary to remove the battery, or covers.
  • Remove the rubber or plastic cover on the back of the fire
  • Remove the fixing or unscrew the defective bulb of the Toyota Tundra
  • Compare it with the new one to be sure it is suitable
  • Place the new bulb gently, then fix it properly
  • Replace the rubber cover and all the elements in the other direction

Now that everything is in place, check that it works! This one should have a similar intensity to the other. It is essential to have completely identical products.

How to adjust the headlights of a Toyota Tundra

After replacing a light, it is plausible that it will be out of order. It is extremely important that two lights at the same height and in the same axis. Among other things so as not to annoy motorists in the other direction. This is why they must be properly regulated. To do this, simply position your car facing a wall. At first a short distance, then a few meters. Second, you will just have to adjust the fire in question to the same height as the other according to the reflections on the wall. If both are set incorrectly, there are tutorials that can help.