Whether it's about the low beams, high beams or turn signals, the changing a light bulb is a very operation easy to perform . But if a fire does not work, you should not delay in changing it. Because some people ignore it, but this is reprehensible by a sanction which can go up to 68 euros. Of course, they will first have to be replaced for safety reasons. So here is how to change the bulb of a headlight on the Toyota Urban Cruiser, point by point. Second, we will find out how to properly fix them.change-headlight-bulb-Toyota-Urban-Cruiser

How to Replace a Toyota Urban Cruiser's Headlight Bulb

Today, there are various types of headlight bulbs. The most common are halogen , however we can also find Xenon , somewhat put on the side now, and lots of bulbs LED . They consume much less electricity and are more robust. Regardless of the type of bulb, the way to replace them will be similar. Here is the logic to follow for change the bulb of your Toyota Urban Cruiser .

  • Disconnect the battery to work more comfortably.
  • Clear access to the rear portion of the light. Sometimes it will be necessary to remove the battery, or else covers.
  • Remove the rubber or plastic cover on the back of the light
  • Unclip or unscrew the damaged bulb of your Toyota Urban Cruiser
  • Compare it well with the new one to make sure it matches
  • Place the new bulb gently, then fix it properly
  • Replace the rubber cover then all the components in reverse

Once everything is in place, check that it works! The latter should have the same intensity as the other. It is essential to have completely identical models.

Configure the headlights of a Toyota Urban Cruiser

After replacing a light, it is plausible that it will be out of order. It is very important that two lights at the same height and in the same axis. In particular not to annoy the drivers you meet. That is why they must be settled properly. To do this, you just have to position your automobile in front of a wall. First a short distance, then 5 or 6 meters. Secondly, just adjust the fire with the new bulb in the same way as the other according to the reflections on the wall. If neither goes, there are tutorials that can help you.