That it concerns low beam, high beams or turn signals, the bulb replacement is a very operation simple to execute . But if a fire does not work, do not delay in replacing it. Because some people forget it, but it remains reprehensible by a ticket which can go up to 68 euros. Obviously, they must first be repaired for safety reasons. This is therefore how to replace the headlight bulb on the Toyota Verso, point by point. Second, we will find out how to set them correctly.
How to Replace a Toyota Verso Headlight Bulb
Now there are several types of headlight bulbs. The most common are halogen , but there are also Xenon , a little neglected today, and a lot of bulbs LED . They consume much less electricity and are more enduring. Regardless of the type of bulb, the way to replace them will be similar. So here is the logic to follow in order to replace the bulb in your Toyota Verso .
- Disconnect the battery in order to work more quietly.
- Clear access to the rear portion of the light. From time to time it will be necessary to disassemble the battery, or covers.
- Remove the rubber or plastic cover behind the fire
- Remove the fixing or unscrew the broken bulb from your Toyota Verso
- Compare it well with the new one to be certain that it is suitable
- Place the new bulb gently, then fix it correctly
- Reclip the rubber cover then all the elements in the other direction
Once everything is in place, test the bulb! This should have an intensity similar to the other. It is important to have completely identical models.
How to set the headlights of a Toyota Verso
After replacing a light, it is possible that it will be out of order. It is very important that two lights at the same height and focused the same way. Among other things so as not to obstruct the conductors in the other direction. So take the time to adjust them correctly. To do this, simply place your car facing a wall. First a meter from the wall, then 5 or 6 meters. Second, you just have to adjust the fire with the new bulb in the same way as the other by comparing the halos. If the two are poorly adjusted, there are tutorials very well done on this subject.