Whether it's for low beam, high beams or turn signals, the bulb replacement is a very manipulation convenient to execute . But when a fire no longer works, it should not be long to repair it. Because some people do not know it, but this is reprehensible by a penalty of up to 68 euros. Obviously, it is necessary to replace them first for safety reasons. So that's how to replace the headlight bulb on your Toyota Yaris 2 Ts, step by step. In a second step, we will find out how to set them correctly.
How to change the bulb of a Toyota Yaris 2 Ts headlight
Nowadays, there are several types of headlight bulbs. The most common are halogen , however we can also find Xenon , somewhat neglected now, and more and more light bulbs LED . They are much less energy intensive and more resistant. Whatever the type of bulb, the way to change them will be similar. You will find below the procedure to follow for replace the bulb in your Toyota Yaris 2 Ts .
- Disconnect the battery to work more comfortably.
- Clear access to the rear part of the light. At times it will be necessary to remove the battery, or else covers.
- Remove the rubber or plastic cover on the back of the fire
- Unclip or unscrew the defective bulb from the Toyota Yaris 2 Ts
- Compare it with the news to make sure it fits
- Position the new bulb gently, then fix it correctly
- Replace the rubber cover then all the components in reverse
Once everything is in order, test the bulb! This one should have the same intensity as the other. It is essential to have perfectly identical models.
Adjust the headlights of a Toyota Yaris 2 Ts
Now that the fire is in place, it is plausible that the latter is out of order. It is extremely important that two lights at the same height and in the same axis. In particular not to annoy the drivers you meet. That is why they must be set correctly. To do this, simply position your vehicle in front of a wall. First one meter from the wall, then 5 or 6 meters. In a second step, you will just have to adjust the fire with the new bulb in the same way as the other by comparing the halos. If neither goes, there are tutorials that can help you.