That it concerns low beam, high beams or turn signals, the bulb replacement is a very manipulation simple to do . But if a fire does not work, it should not be long before replacing it. Because many forget it, but it remains condemnable by a sanction which can go up to 68 euros. Obviously, they must first be replaced for safety reasons. This is therefore how to change the bulb of a headlight on a Toyota Yaris 2, point by point. Second, we will find out how to properly fix them.changing-headlight-bulb-Toyota-Yaris-2

How to replace a Toyota Yaris 2 headlight bulb

Today, there are several types of headlight bulbs. The most common are halogen , but there are also Xenon , slightly put on the side now, and more and more bulbs LED . The latter consume much less electricity and are more robust. Whatever the type of bulb, the way to replace them will be similar. You will find below the procedure to follow in order to change the bulb in your Toyota Yaris 2 .

  • Disconnect the battery in order to work more comfortably.
  • Free access to the rear portion of the fire. At times it will be necessary to disassemble the battery or covers.
  • Remove the rubber or plastic cover on the back of the light
  • Unclip or unscrew the broken bulb of your Toyota Yaris 2
  • Compare it with the news to make sure it fits
  • Put the new bulb down gently, then fix it properly
  • Replace the rubber cover and all components in the opposite direction

Now that everything is in order, check that it works! The latter should have the same intensity as the other. It is essential to have totally similar products.

How to adjust the headlights of a Toyota Yaris 2

After replacing a light, it is plausible that it will be out of order. It is extremely important that two lights at the same height and in the same axis. In particular not to annoy the conductors opposite. So take the time to settle them properly. To do this, simply place your automobile facing a wall. First a short distance, then 5 or 6 meters. Second, you just have to adjust the fire with the new bulb at the same height as the other according to the reflections on the wall. If neither goes, there are very good tutorials on this.