That it concerns low beam, high beams or turn signals, the changing a light bulb is a super manipulation simple to do . But in case a fire does not work, it should not be long to replace it. Because many forget it, but it remains punishable by a fine which can go up to 68 euros. Obviously, you will have to start replacing them for safety reasons. Here is how you can replace the headlight bulb on your Toyota Yaris 3, step by step. Thereafter, we will see how to properly settle them.
How to change the bulb of a Toyota Yaris 3 headlight
Now there are a number of types of headlight bulbs. The most common are halogen , however we can also find Xenon , slightly put on the side now, and lots of bulbs LED . They consume much less electricity and are more robust. Whatever the type of bulb, the way to change them will be similar. Here is the logic to follow for replace the bulb in your Toyota Yaris 3 .
- Disconnect the battery to work more comfortably.
- Clear access to the rear part of the light. It will sometimes be necessary to remove the battery, or else covers.
- Remove the rubber or plastic cover behind the fire
- Unclip or unscrew the damaged bulb from the Toyota Yaris 3
- Compare it well with the new one to make sure it matches
- Place the new bulb gently, then fix it properly
- Replace the rubber cover and all components in the opposite direction
Now that everything is in order, test the bulb! The latter should display an intensity similar to the other. It is essential to have perfectly similar products.
How to set the headlights of a Toyota Yaris 3
Now that the fire is in place, it is plausible that the latter is out of order. It is very important that two lights at the same height and in the same axis. Among other things so as not to disturb the motorists you meet. So take the time to settle them properly. To do this, you must position your automobile facing a wall. To start one meter from the wall, then a few meters. Thereafter, it is enough to regulate the fire in question in the same way as the other according to the reflections on the wall. If neither goes, there are tutorials that can help.