Whether it's for low beam, high beams or turn signals, the changing a light bulb is a very operation convenient to do . But in the event that a light no longer works, you should not wait to replace it. Because some people do not know it, but it is punishable by a penalty of up to 68 euros. Naturally, you will first have to replace them for safety reasons. So here is how to change the bulb of a headlight on a Toyota Yaris Verso, step by step. In a second step, we will find out how to set them correctly.changing-headlight-bulb-Toyota-Yaris-Verso

How to replace the bulb of a Toyota Yaris Verso headlight

Now there are several types of headlight bulbs. The most common are halogen , however there are also Xenon , slightly put on the side today, and a lot of bulbs LED . These are much less greedy in electricity and more enduring. Regardless of the type of bulb, the way to replace them will be similar. You will find below the logic to follow in order to change the bulb of your Toyota Yaris Verso .

  • Disconnect the battery in order to work more serenely.
  • Clear access to the rear part of the light. It will sometimes be necessary to remove the battery, or covers.
  • Remove the rubber or plastic cover behind the fire
  • Remove the fixing or unscrew the broken bulb from the Toyota Yaris Verso
  • Compare it with the news to make sure it matches
  • Place the new bulb gently, then fix it correctly
  • Reclip the rubber cover and all of the elements by following the reverse procedure

Now that everything is in order, test the bulb! The latter should have the same intensity as the other. It is essential to have perfectly identical models.

How to adjust the headlights of a Toyota Yaris Verso

Now that the fire is in place, it may be out of order. It is very important that two lights at the same height and in the same axis. Among other things so as not to annoy the conductors opposite. That's why you have to take the time to adjust them correctly. To do this, you just have to place your car facing a wall. First a meter from the wall, then 5 or 6 meters. In a second step, you will just have to adjust the fire with the new bulb at the same height as the other by comparing the halos. If the two are poorly adjusted, there are tutorials very well done on this subject.