That it concerns low beam, high beams or turn signals, the bulb replacement is a very operation easy to make . But if a fire does not work, you should not wait to replace it. Because many forget it, but it is reprehensible by a fine which can go up to 68 euros. Of course, they must first be repaired for safety reasons. So that's how to replace the headlight bulb on your Volkswagen 1200, point by point. Second, we will find out how to properly adjust them.
How to replace the bulb of a Volkswagen 1200 headlight
Nowadays, there are a number of types of headlight bulbs. The most common are halogen , but there are also Xenon , slightly put on the side now, and lots of bulbs LED . They consume much less electricity and are more robust. Whatever the type of bulb, the way to replace them will be identical. Here is the logic to follow for replace the bulb in your Volkswagen 1200 .
- Disconnect the battery to work more comfortably.
- Free access to the rear portion of the fire. At times it will be necessary to remove the battery, or else covers.
- Remove the rubber or plastic cover behind the fire
- Remove the fixing or unscrew the defective bulb from your Volkswagen 1200
- Compare it with the news to make sure it fits
- Place the new bulb gently, then fix it properly
- Replace the rubber cover and all the elements in reverse order
Now that everything is in place, check that it works! This one should have an intensity equal to the other. It is essential to have perfectly identical models.
Adjusting the headlights of a Volkswagen 1200
After replacing a light, it is possible that it will be out of order. It is very important that two lights at the same height and focused the same way. Among other things so as not to annoy the drivers in the other direction. It is therefore necessary to take the time to adjust them properly. To do this, you just have to place your automobile in front of a wall. To start a short distance, then a few meters. Second, you just have to adjust the fire with the new bulb at the same height as the other by comparing the halos. If neither of them goes, we find tutorials very well done on this subject.