Whether it's about the low beams, high beams or turn signals, the changing a light bulb is an extremely repair simple to perform . But when a fire no longer works, you should not wait to change it. Because many do not know, but it is punishable by a penalty of up to 68 euros. Obviously, you will have to start changing them for safety reasons. So that's how to change the bulb of a headlight on your Volkswagen Golf 6, point by point. In the second step, we will find out how to properly resolve them.change-bulb-headlight-Volkswagen-Golf-6

How to change the bulb of a Volkswagen Golf 6 headlight

Today, there are a number of types of headlight bulbs. The most common are halogen , however there are also Xenon , slightly put on the side today, and a lot of bulbs LED . They consume much less energy and are more robust. Whatever the type of bulb, the way to change them will be similar. Here is the procedure to follow for change the bulb of your Volkswagen Golf 6 .

  • Disconnect the battery in order to work more serenely.
  • Free access to the rear part of the light. At times it will be necessary to disassemble the battery, or covers.
  • Remove the rubber or plastic cover on the back of the fire
  • Unclip or unscrew the defective bulb from your Volkswagen Golf 6
  • Compare it well with the new one to be certain that it is suitable
  • Place the new bulb gently, then fix it properly
  • Reclip the rubber cover and all the components in the other direction

Now that everything is in order, check that it works! The latter should have the same intensity as the other. It is important to have perfectly similar products.

How to set the headlights of a Volkswagen Golf 6

Now that the fire is in place, it is plausible that it is out of order. It is very important that two lights at the same height and in the same axis. In particular not to annoy the motorists opposite. They must therefore be settled properly. To do this, simply position your vehicle facing a wall. First a meter from the wall, then a few meters. In a second step, it is enough to adjust the fire with the new bulb at the same height as the other by comparing the halos. If neither goes, there are very good tutorials on this.