Whether it's for low beam, high beams or turn signals, the bulb replacement is an extremely manipulation convenient to perform . But if a light does not work, do not wait to replace it. Because many are unaware of it, but that remains condemnable by a fine which can go up to 68 euros. Naturally, they must first be changed for safety reasons. So that's how to replace the headlight bulb on your Volkswagen Golf 7 Sw Alltrack, step by step. Then we will see how to properly adjust them.change-bulb-headlight-Volkswagen-Golf-7-Sw-Alltrack

How to replace the bulb of a Volkswagen Golf 7 Sw Alltrack headlight

Nowadays, there are a number of types of headlight bulbs. The most common are halogen , however there are also Xenon , somewhat put on the side today, and more and more light bulbs LED . They consume less energy and are more enduring. Whatever the type of bulb, the way to replace them will be identical. So here is the procedure to follow for replace the bulb in your Volkswagen Golf 7 Sw Alltrack .

  • Disconnect the battery so that you can work more quietly.
  • Free access to the rear portion of the fire. It will sometimes be necessary to disassemble the battery, or else covers.
  • Remove the rubber or plastic cover behind the fire
  • Unclip or unscrew the broken bulb of your Volkswagen Golf 7 Sw Alltrack
  • Compare it well with the new one to make sure it fits
  • Put the new bulb down gently, then fix it properly
  • Reclip the rubber cover then all the elements in reverse

Now that everything is in place, test the bulb! This should have an intensity similar to the other. It is important to have perfectly identical products.

How to properly set up the headlights of a Volkswagen Golf 7 Sw Alltrack

After replacing a light, it is plausible that it will be out of order. It is very important that two lights at the same height and focused the same way. In particular so as not to obstruct the conductors in the other direction. They must therefore be settled properly. To do this, simply place your automobile in front of a wall. First a short distance, then 5 or 6 meters. Then, you just have to adjust the light in question to the same height as the other by comparing the halos. If the two are poorly adjusted, there are tutorials very well done on this subject.