Whether it's for low beam, high beams or turn signals, the bulb replacement is a super repair easy to execute . But if a fire stops working, you should not wait to repair it. Because many do not know, but it remains reprehensible by a fine of up to 68 euros. Obviously, it is necessary to start replacing them for safety reasons. So that's how to change the headlight bulb on the Volkswagen Golf 7 Sw, point by point. Second, we will find out how to set them correctly.
How to replace the bulb of a Volkswagen Golf 7 Sw headlight
Today there are various types of headlight bulbs. The most common are halogen , but there are also Xenon , somewhat neglected today, and more and more light bulbs LED . The latter consume much less electricity and are more enduring. Regardless of the type of bulb, the way to replace them will be similar. So that's the logic to follow for change the bulb of your Volkswagen Golf 7 Sw .
- Disconnect the battery in order to work more quietly.
- Free access to the rear portion of the fire. It will sometimes be necessary to remove the battery, or else covers.
- Remove the rubber or plastic cover behind the fire
- Remove the fixing or unscrew the damaged bulb from the Volkswagen Golf 7 Sw
- Compare it well with the new one to be sure it fits
- Position the new bulb gently, then fix it correctly
- Replace the rubber cover and all of the elements by following the reverse procedure.
Now that everything is in order, test the bulb! This one should have an intensity equal to the other. It is essential to have completely identical models.
Adjusting the headlights of a Volkswagen Golf 7 Sw
Now that the fire is in place, it remains plausible that the latter is out of order. It is very important that two lights at the same height and in the same axis. In particular not to upset the conductors opposite. That's why you have to take the time to adjust them correctly. To do this, you must position your car in front of a wall. First one meter from the wall, then a few meters. Second, just set the light in question to the same height as the other by comparing the halos. If the two are poorly adjusted, there are tutorials very well done on this subject.