Your starter is starting to fail, so it's time to replace it with a new one. Don't let it hang out if you ever notice it, because when the starter is definitely broken you will no longer be able to start this Hyundai Ix20. Here is a text in order to change its starter and understand its principle.
What is the starter motor of my Hyundai Ix20 for?
The starter turns out to be an electric motor within the engine of this Hyundai Ix20. The latter draws electricity from the battery to start, and sends the impulse to the motor to start. In order to be certain that it is really a starter problem and not a battery problem, we suggest that you read the file on starting problems. Now that we've identified the problem, let's get down to business.
How to change the starter of my Hyundai Ix20?
Before starting work, check that you have the necessary equipment. If you wish to carry out such an operation you will necessarily need an integral toolbox, your jack, your wire brush but also two candles.
Remove the old starter
In order to carry out this operation, what is essential will be to clearly visualize the positions, for the cables in particular. You can mark them if necessary.
- Disconnect the negative terminal of the battery of this Hyundai Ix20.
- If accessing the starter from above is too complex, you can use the jack stands to get there from below.
- Disconnect all of the power supplies that are connected to the starter
- Position a jack under the engine when Position moves a bit.
- Remove each of the fixings and remember the positions
- Remove the starter
- Keep the mounting bracket, as it will not necessarily be sold with the new starter
- Clean the pods that could be oxidized using a brush
Attach new starter
Now that we have learned the technique, it is almost enough to do the reverse procedure.
- Parallel the old starter of this Hyundai Ix20 with the brand new one so that you can discern if there are variations in the mounting system, something that happens from time to time.
- Reclip the starter support to its position
- Place the new starter in its location
- Make sure it is correctly on its base and screw
- Reconnect the power supplies to the starter
- Connect the minus terminal of this battery.
Its good. Now fitting a starter on this Hyundai Ix20 is not magic for you. Have a good trip, and do not hesitate to leave a comment if this file has helped you!