Your starter is starting to falter, so it's time to replace it with a new one. You should not delay too much when you feel it weaken, because if the starter breaks down it will be too late to start your Kia Clarus. Here is a text to change its starter and assimilate its principle.change-starter-Kia-Clarus

What is the starter for my Kia Clarus used for?

A starter is an electric motor inside the engine of your Kia Clarus. The latter draws electricity from the battery to operate, and sends the impulse to the motor to start. To verify that this is really a starter problem and not something else, we advise you to discover our text on startup problems. Now that we've identified the problem, let's get down to business.

How to change the starter on my Kia Clarus?

Before tackling repairs, make sure you have the necessary tools. If you wish to carry out such a manipulation you will necessarily need an integral toolbox, a jack, a wire brush but also a pair of candles.

Remove the old starter

If you want to perform this action, what is important turns out to be to correctly remember the positions, of the wires in particular. You can stamp them if you are afraid of forgetting.

  • Disconnect the minus terminal from the battery of your Kia Clarus.
  • If access to the starter motor from the top is too complex, do not hesitate to use jack stands so as to gain easier access.
  • Disconnect all of the power supplies that connect to the starter
  • Position the jack under the engine when the engine is moving a bit.
  • Release all the fixings and retain the positions
  • Remove the starter
  • Put aside the fixing frame, since it is not systematically supplied with the brand new starter
  • Polish the pods which will sometimes be oxidized using a brush

Attach new starter

Now that we have visualized the technique, it will be sufficient to approximately perform the reverse procedure.

  • Examine the old starter of your Kia Clarus with the brand new one to check if there are some variations in the mounting system, which is not uncommon to see.
  • Return the starter armature to its position
  • Install the new starter
  • Make sure that it is well in its support and screw
  • Return the power supplies to the starter
  • Connect the minus terminal of this battery.

Its good. Now putting a starter on your Kia Clarus is not magic for your eyes. Be careful on the road, and you can write a comment if this text helped you!