The advantage of an electric window regulator is enormous in comparison with manual mechanisms. However, it has the disadvantage of being much more complicated in terms of repairs. Also, it is not necessarily easy to pinpoint the cause of the problem. Here we will see how to repair the electric window regulator of a Citroen Nemo Combi . But before seeing the procedure to follow, you must be certain of knowing where the dysfunction comes from. Indeed, it is regularly unnecessary to replace the entire window regulator, a simple repair can sometimes work. Whether it's a false contact, or just a lack of oil. Now that you are sure of the origin of the concern, let us return to our subject.
How to replace a Citroen Nemo Combi window regulator
Changing a window regulator is rather tedious. Depending on your experience on the subject, plan about two o'clock to make sure we have the time. Whether on a Citroen Nemo Combi or on another vehicle, this manipulation is for experienced DIY enthusiasts. So let's see how to do it, step by step. We advise you to take pictures at several stages to help you reassemble the new window regulator.
Removing a window regulator on a Citroen Nemo Combi
- Remove all of the door trim. From the mirror cover to the handle. This should be done very gently using a flat screwdriver. You will have to make sure you have access to the window regulator at any point without being disturbed. This step is the longest to perform.
- Remove the window regulator seals from your Citroen Nemo Combi. Again, it's wiser to do it delicately.
- Now that you have accessed the window regulator, disconnect the connectors. You will then have to remove the motor from the window regulator when the window is blocked.
- Take out all the fasteners that hold the glass, then take it out. It is regularly more advisable to position the window halfway up to be able to carry out this operation. Naturally, great care must be taken when handling the glass. It is best to put it on a sufficiently thick sheet.
- Remove the window regulator entirely. It is wiser to remember your position. You can take a picture of it if it helps you fix the new window regulator. The window regulator is regularly held by screws or rivets, it will thus be necessary to remove them.
The installation of an electric window regulator of a Citroen Nemo Combi
- Fit the new window regulator. Make sure that its position is similar to the damaged window lifter. You will no doubt need to use the fasteners that you have removed.
- Replace the glass just as you pulled it out. It will regularly be necessary to move it slightly so that it fits properly in its guide.
- Reconnect the connectors.
- Replace the seals that you have carefully removed.
- Replace all of the door trim.
That's it, you now have a new and functional window regulator . You will have to put the ignition on and test it.