The advantage of an electric window regulator is enormous compared to manual systems. However, it has the disadvantage of being much more complicated in terms of repairs. In addition, it is not always easy to pinpoint the nature of the problem. With this article we will see how to change the electric window regulator of a Citroen Nemo . But before seeing the procedure to follow, you must be certain to understand where the dysfunction came from. Indeed, it is regularly useless to change the whole window regulator, a simple small repair will sometimes work. Whether it's a false contact, or just a lack of oiling. Now that you've identified the cause of the problem, let's get back to our topic.
Replacing a Citroen Nemo window regulator: how to do it
Changing a window regulator is rather tedious. Depending on your expertise on the subject, plan approximately two o'clock to make sure you have the time you need. Whether for a Citroen Nemo or another vehicle, this repair is for experienced DIY enthusiasts. So let's take a look at how to do it, step by step. It is advisable to take pictures at several stages in order to help you mount the new window regulator.
Removing a window regulator on a Citroen Nemo
- Remove all of the door trim. From the mirror cover to the handle. This should be done very gently using a flat screwdriver. You will have to make sure you have access to the window regulator at all points without being embarrassed. This manipulation is the longest to perform.
- Disassemble the window regulator seals from your Citroen Nemo. Again, it is essential to do this carefully.
- Now that you have accessed the window regulator, remove the connectors. You can then remove the motor from the window regulator when it is blocked.
- Remove all the fasteners that hold the glass, then take it out. It is regularly better to position the window halfway up to perform this operation. Obviously you have to be very careful when handling the glass. It is best to put it on a rather thick sheet.
- Disassemble the window regulator completely. It is essential to memorize your location. You can take a picture of it if it helps you to install the new window regulator. The window regulator is regularly held in place by screws or rivets, so they must be removed.
The installation of an electric window regulator of a Citroen Nemo
- Position the new window regulator. Make sure that its location is similar to the damaged window lifter. You will probably need to use the fasteners you have set aside.
- Replace the glass just as you took it out. It will regularly be necessary to move it a little so that it fits correctly in its guide.
- Reconnect the connectors.
- Fit the seals that you have carefully removed.
- Refit all of the door trim.
It's good, you now have a new and functional window regulator . So you can turn on your car and test it.