The advantage of an electric window regulator is undeniable in comparison with manual mechanisms. However, it has the disadvantage of being much more restrictive in terms of repairs. Also, it's not necessarily easy to pinpoint the source of the problem. Here we will see how to repair the electric window regulator of a Citroen Osmose . But before you start, you have to be sure you know where the problem came from. Indeed, it is sometimes unnecessary to replace the entire window regulator, a simple repair will sometimes suffice. Whether it concerns an electrical short circuit, or simply a lack of lubrication. Now that you've identified the nature of the problem, let's get to the heart of the matter.change-window-lift-Citroen-Osmose

How to replace a Citroen Osmose window regulator

The replacement of a window regulator is relatively long. Depending on your expertise in the field, plan approximately two o'clock to make sure you don't get caught up in time. Whether for a Citroen Osmose or on another vehicle, this operation is for experienced DIY enthusiasts. So let's see how to do it, step by step. It is advisable to take photos at different times to help you install the new window regulator.

Removing a window regulator on a Citroen Osmose

  • Remove the entire door trim. From the handle to the mirror cover. This should be done relatively carefully with a flat screwdriver. You will have to make sure to access the window regulator at any point without being disturbed. This step is the longest to complete.
  • Remove the window regulator seals from your Citroen Osmose. Again, it is essential to do it delicately.
  • Now that you have accessed the window regulator, disconnect the connectors. You will then have to remove the motor from the window regulator if it is blocked.
  • Release all the fasteners that hold the glass, then remove the glass. It is sometimes advisable to place the window halfway up to be able to carry out this operation. Of course, extreme care must be taken when moving the glass. It's best to put it on a rather thick sheet.
  • Remove the window regulator entirely. It is essential to remember its location. You can take a picture of it if it helps you fix the new window regulator. The window regulator is sometimes held in place by screws or rivets, so you must remove them.

The installation of an electric window regulator of a Citroen Osmose

  • Present the new window regulator. Make sure that its position is similar to the damaged window lifter. You will probably have to use the fixings that you removed.
  • Reposition the glass just as you removed it. Sometimes it will be necessary to move it a little so that it fits properly in its guide.
  • Reconnect the connectors.
  • Fit the seals that you have carefully removed.
  • Refit the entire door trim.

That's it, you now have a new and functional window regulator . So you will need to turn on your car and test it.