The advantage of an electric window regulator is undeniable in comparison with manual systems. However, it has the disadvantage of being much more restrictive in terms of repairs. Also, it is not necessarily easy to determine precisely the nature of the failure. With this article we will see how to repair the electric window regulator of a Citroen Saxo Vts . But before you start, you need to be sure you know where the problem is coming from. Let's be clear, it is sometimes unnecessary to replace the entire window regulator, a simple small repair will sometimes suffice. Whether it's a false contact, or just a lack of lubrication. Now that you are sure of the origin of the dysfunction, let us return to our subject.
How to replace a Citroen Saxo Vts window regulator
Replacing a window regulator is relatively time-consuming. Depending on your expertise on the subject, count approximately three hours to make sure you don't get caught up in time. Whether for a Citroen Saxo Vts or another car, this operation is for experienced DIY enthusiasts. So let's take a look at what to do, step by step. We advise you to take pictures at several stages in order to help you mount the new window regulator.
Removing a window regulator on a Citroen Saxo Vts
- Remove the entire door trim. From the mirror cover to the handle. This should be done relatively carefully using a flat screwdriver. You must ensure that you have access to the window regulator at all points without being obstructed. This manipulation is the longest to execute.
- Disassemble the window regulator seals from your Citroen Saxo Vts. Again, it is important to take it delicately.
- Now that you have accessed the window regulator, disconnect the connectors. You can then remove the motor from the window regulator when it is blocked.
- Take out all the fixings that hold the glass, then take it out. It is sometimes advisable to position the window halfway up to be able to carry out this manipulation. Of course, extreme care must be taken when moving the glass. It is best to put it on a sufficiently thick sheet.
- Disassemble the window regulator as a whole. It is important to remember its location. You can take a picture of it if it helps you to install the new window regulator. The window regulator is at times held in place by screws or rivets, so it will be necessary to remove them.
The installation of an electric window regulator of a Citroen Saxo Vts
- Fit the new window regulator. Make sure that its position is similar to the previous window regulator. You should probably use the fasteners that you have set aside.
- Reposition the glass as you removed it. At times it will be necessary to rotate it slightly so that it fits correctly in its guide.
- Connect the connectors.
- Replace the seals you removed.
- Reassemble the door trim assembly.
That's it, you now have a new and working window regulator . So you can put the ignition on and test it.