The advantage of an electric window regulator is substantial compared to manual systems. However, it has the disadvantage of being much more restrictive in terms of repairs. Also, it is not necessarily easy to pinpoint the origin of the problem. Here we will see how to change the electric window regulator of a Citroen Saxo . But before seeing the procedure to follow, you must be certain of knowing where the breakdown comes from. Indeed, it is sometimes unnecessary to change the entire window regulator, a simple repair will often work. Whether it's an electrical short circuit, or simply a lack of lubrication. Now that you are sure of the origin of the concern, let us return to our subject.
How to replace a Citroen Saxo window regulator
Changing a window regulator is quite time consuming. Depending on your experience on the subject, count approximately three hours to make sure you have the time you need. Whether on a Citroen Saxo or on another car, this manipulation is for experienced DIY enthusiasts. So let's see what to do, step by step. We advise you to take pictures at several stages in order to help you mount the new window regulator.
Removing a window regulator on a Citroen Saxo
- Remove all of the door trim. From the handle to the mirror cover. This should be done with enough caution using a flat screwdriver. You must ensure that you access the window regulator at any point without being disturbed. This manipulation is the longest to carry out.
- Remove the window regulator seals from your Citroen Saxo. Again, it is essential to do this carefully.
- Now that you have accessed the window regulator, disconnect the connectors. You will then have to release the window lifter motor if it is stuck.
- Release all the fasteners that hold the glass, then remove it. It is sometimes better to position the window halfway up to be able to carry out this operation. Of course you have to be very careful when handling the glass. It is advisable to place it on a rather thick sheet.
- Remove the window regulator completely. It is essential to remember its location. You can take a picture of it if it helps you fix the new window regulator. The window regulator is sometimes held in place by screws or rivets, it will therefore be necessary to remove them.
The installation of an electric window regulator of a Citroen Saxo
- Introduce the new window regulator. Make sure that its location is identical to the damaged window regulator. You will certainly have to use the fixings that you removed.
- Reposition the glass as you removed it. It will sometimes be necessary to rotate it slightly so that it fits properly in its guide.
- Reconnect the connectors.
- Replace the seals you removed.
- Refit all of the door trim.
It's done, you now have a new and working window regulator . You will therefore have to switch on and test it.