The interest of an electric window regulator is consequent compared to the manual window regulators. On the other hand, it has the drawback of being much more complicated in terms of repairs. Also, it is not necessarily easy to pinpoint the cause of the problem. With this article we will find out how to change the electric window of a Citroen Spacetourer . But before seeing what to do next, you have to be sure you understand where the failure is coming from. Indeed, it is from time to time unnecessary to change the entire window regulator, a simple small repair can sometimes be sufficient. Whether it's an electrical short circuit, or simply a lack of lubrication. Now that you are sure what the source of the problem is, let's get to the heart of the matter.
How to replace a Citroen Spacetourer window regulator
Changing a window regulator is relatively long. Depending on your experience on the subject, count approximately two o'clock in order to be sure that you have the necessary time. Whether on a Citroen Spacetourer or on another car, this operation is for experienced handymen. So let's see what to do, point by point. We recommend that you take a picture at different times to help you reassemble the new window regulator.
Removing a window regulator on a Citroen Spacetourer
- Remove the entire door trim. From mirror cover to handle. This manipulation should be done relatively gently using a flat screwdriver. Make sure to access the window regulator at all points without being disturbed. This step is the longest to perform.
- Remove the window regulator seals from your Citroen Spacetourer. Again, it's important to go about it gently.
- Now that you have accessed the window regulator, remove the connectors. You will then have to disengage the window lifter motor if it is blocked.
- Remove all the fasteners that hold the glass in place, then remove the glass. It is from time to time wiser to place the window halfway up to carry out this manipulation. Of course, we will have to be very careful when handling the glass. It is advisable to place it on a sufficiently thick sheet.
- Remove the window regulator completely. It is important to remember its location. You can take a picture of it if it helps you fit the new window regulator. The window regulator is occasionally held by screws or rivets, so they must be removed.
Installing an electric window regulator on a Citroen Spacetourer
- Position the new window regulator. Make sure that its position is similar to the damaged window regulator. You may need to use the fasteners you removed.
- Replace the glass as you removed it. It will be necessary from time to time to make it move a little so that it is placed correctly in its guide.
- Connect the connectors.
- Replace the seals that you have carefully removed.
- Refit the entire door trim.
That's it, you now have a new and functional window regulator . You will need to turn on your car and test it.