The advantage of an electric window regulator is undeniable in comparison with manual mechanisms. However, it has the disadvantage of being much more complex in terms of repairs. Also, it is not always easy to pinpoint the cause of the problem. With this article we will see how to replace the electric window regulator of a Citroen Survolt . But before you start, you have to be sure you understand where the fault is coming from. Indeed, it is sometimes unnecessary to change the entire window regulator, a simple small repair can sometimes work. Whether it's a false contact, or just a lack of lubrication. Now that you've identified the source of the problem, let's get to the heart of the matter.
How to replace a Citroen Survolt window regulator
The replacement of a window regulator is relatively long. Depending on your experience in the field, count about three hours to make sure you don't get caught up in time. Whether it is on a Citroen Survolt or on another car, this repair is for experienced DIY enthusiasts. So let's see what to do, step by step. We advise you to take pictures at several stages in order to help you mount the new window regulator.
Removing a window regulator on a Citroen Survolt
- Dismantle the entire door trim. From the mirror cover to the handle. This should be done relatively carefully using a flat screwdriver. You must ensure that you have access to the window regulator at all points without being disturbed. This step is quite long to perform.
- Disassemble the window regulator seals from your Citroen Survolt. Again, it is wiser to do it carefully.
- Now that you have access to the window regulator, disconnect the connectors. You can then release the window lifter motor when it is stuck.
- Remove all the fasteners that hold the glass, then take it out. It is sometimes better to position the window halfway up to carry out this manipulation. Naturally, great care must be taken when moving the glass. It is advisable to place it on a rather thick sheet.
- Disassemble the window regulator as a whole. It is wiser to memorize your location. You can take a picture of it if it helps you fix the new window regulator. The window regulator is at times held by screws or rivets, so it will be necessary to remove them.
The installation of an electric window regulator of a Citroen Survolt
- Introduce the new window regulator. Make sure that its location is identical to the damaged window regulator. You will certainly need to use the fasteners you have removed.
- Replace the glass in the same way as you took it out. At times it will be necessary to move it a little so that it fits properly in its guide.
- Reconnect the connectors.
- Replace the seals you removed.
- Replace all of the door trim.
It's done, you now have a new and working window regulator . So you can turn on your car and test it.