The advantage of an electric window regulator is huge compared to manual mechanisms. However, it has the disadvantage of being much more restrictive in terms of repairs. In addition, it is not necessarily easy to precisely identify the source of the failure. In this article we will see how to repair the electric window of a Citroen Traction 11 . But before you can see what to do, you need to be sure you know where the problem is coming from. Indeed, it is from time to time useless to change the entire window regulator, a simple repair will sometimes work. Whether it's a bad contact, or just a lack of lubrication. Now that you've identified the source of the malfunction, let's get back to our topic.change-window-lift-Citroen-Traction-11

How to replace a Citroen Traction 11 window regulator

It takes a long time to change a window regulator. Depending on your expertise on the subject, count about three hours in order to be sure to have the necessary time. Whether for a Citroen Traction 11 or on another car, this operation is for experienced handymen. So let's see how to do it, step by step. We recommend that you take a picture at different times to help you fit the new window regulator.

Removing a window regulator on a Citroen Traction 11

  • Remove the entire door trim. From mirror cover to handle. This operation should be done rather delicately with a flat screwdriver. You will have to make sure you have access to the window regulator at all points without being disturbed. This manipulation is the longest to perform.
  • Remove the window regulator gaskets from your Citroen Traction 11. Once again, it is essential to proceed with caution.
  • Now that you have accessed the window regulator, remove the connectors. You can then remove the motor from the window regulator if it is ever stuck.
  • Take out all the fasteners that hold the glass in place, then remove the glass. From time to time it is better to place the window halfway up to perform this operation. Of course you have to be very careful when moving the window. It is advisable to put it on a sufficiently thick sheet.
  • Disassemble the window regulator as a whole. It is essential to remember your location well. You can take a picture of it if it helps you attach the new window regulator. The window regulator is from time to time held in place by screws or rivets, so they will have to be removed.

Installing an electric window regulator on a Citroen Traction 11

  • Position the new window regulator. Make sure that its position is similar to the previous window regulator. You will probably need to use the fasteners you put aside.
  • Replace the glass as you removed it. It will be necessary from time to time to make it move slightly so that it fits properly in its guide.
  • Reconnect the connectors.
  • Fit the seals you removed.
  • Replace all of the door trim.

It's done, you now have a new and working window regulator . So you can switch on and test it.