The advantage of an electric window regulator is enormous compared to manual window regulators. However, it has the defect of being much more complex in terms of repairs. Also, it is not necessarily easy to pinpoint the cause of the failure. In this article we will see how to replace the electric window regulator of a Citroen Traction 15 . But before seeing the procedure to follow, you must be sure to understand where the problem comes from. Let's be clear, it is sometimes unnecessary to replace the entire window regulator, a simple small repair can often work. Whether it concerns a false contact, or just a lack of lubrication. Now that you've identified the nature of the dysfunction, let's get back to our topic.change-window-lift-Citroen-Traction-15

How to replace a Citroen Traction 15 window regulator

Changing a window regulator is quite long. Depending on your experience on the subject, count approximately three hours to make sure you have the time you need. Whether it is on a Citroen Traction 15 or on another vehicle, this manipulation is for experienced DIY enthusiasts. So let's look at what to do, step by step. We advise you to take pictures at different times to help you reassemble the new window regulator.

Removing a window regulator on a Citroen Traction 15

  • Remove all of the door trim. From the mirror cover to the handle. This should be done very gently using a flat screwdriver. You must ensure that you access the window regulator at any point without being disturbed. This manipulation is quite long to execute.
  • Remove the window regulator seals from your Citroen Traction 15. Again, it is wiser to do so with care.
  • Now that you have access to the window regulator, remove the connectors. You must then remove the motor from the window regulator if it is stuck.
  • Release all the fasteners that hold the glass, then remove it. It is sometimes better to position the window halfway up to be able to carry out this operation. Of course, extreme care must be taken when handling the glass. It is best to put it on a sufficiently thick sheet.
  • Remove the window regulator entirely. It is wiser to memorize your position. You can take a picture of it if it helps you fix the new window regulator. The window regulator is sometimes held in place by screws or rivets, so you will need to remove them.

Installing an electric window regulator on a Citroen Traction 15

  • Position the new window regulator. Make sure that its location is identical to the damaged window regulator. You will no doubt need to use the fasteners that you have removed.
  • Replace the glass as you removed it. It will sometimes be necessary to move it slightly so that it fits properly in its guide.
  • Reconnect the connectors.
  • Fit the seals that you have carefully removed.
  • Replace all of the door trim.

It's good, you now have a new and working window regulator . So you have to switch on and test it.