The advantage of an electric window regulator is enormous compared to manual mechanisms. However, it has the disadvantage of being much more restrictive in terms of repairs. Also, it is not necessarily easy to pinpoint the source of the fault. In this article, we will discover how to change the electric window regulator of a Citroen Visa . But before you see what to do, you need to be sure you understand where the problem came from. Let's be clear, it is from time to time unnecessary to change the entire window regulator, a simple repair can often work. Whether it concerns a false contact, or simply a lack of lubrication. Now that you've identified the source of the problem, let's get to the heart of the matter.change-window-lift-Citroen-Visa

How to replace a Citroen Visa window regulator

Changing a window regulator is relatively tedious. Depending on your expertise on the subject, plan approximately two o'clock to make sure you don't get caught up in time. Whether on a Citroen Visa or another vehicle, this repair is for experienced DIY enthusiasts. So let's see how to do it, step by step. We advise you to take pictures at several stages in order to help you reassemble the new window regulator.

Removing a window regulator on a Citroen Visa

  • Remove the entire door trim. From the mirror cover to the handle. This should be done relatively carefully with a flat screwdriver. You must ensure that you access the window regulator at all points without being obstructed. This manipulation is the longest to execute.
  • Disassemble the window regulator seals from your Citroen Visa. Again, it is essential to do it delicately.
  • Now that you have accessed the window regulator, disconnect the connectors. You must then remove the motor from the window regulator when it is stuck.
  • Remove all the fasteners that hold the glass, then release it. It is occasionally advisable to position the window halfway up to be able to carry out this operation. Of course we will have to be extremely careful when moving the glass. It is best to put it on a sufficiently thick sheet.
  • Disassemble the window regulator entirely. It is essential to memorize your position. You can take a picture of it if it helps you fix the new window regulator. The window regulator is occasionally held by screws or rivets, so they must be removed.

The installation of an electric window regulator of a Citroen Visa

  • Position the new window regulator. Make sure that its location is similar to the previous window regulator. You should definitely use the fasteners you removed.
  • Reposition the glass as you removed it. It will be necessary from time to time to rotate it slightly so that it fits properly in its guide.
  • Connect the connectors.
  • Replace the seals you removed.
  • Reassemble the door trim assembly.

It's good, you now have a new and working window regulator . So you have to turn on your car and test it.