The advantage of an electric window regulator is undeniable compared to manual window regulators. However, it has the drawback of being much more complex in terms of repairs. Also, it is not necessarily easy to identify precisely the origin of the failure. With this article we will find out how to change the electric window regulator of a hyundai i20 . But before seeing what to do next, you have to be sure you know where the problem is coming from. Indeed, it is sometimes unnecessary to replace the entire window regulator, a simple repair can sometimes suffice. Whether it concerns a false contact, or quite simply a lack of lubrication. Now that you're sure what the problem is, let's get to the heart of the matter.change-window-regulator-hyundai-i20

Replacing a window regulator for hyundai i20: how to do it

Changing a window regulator is rather tedious. Depending on your experience in the field, plan approximately two o'clock to make sure you don't get caught up in the time. Whether for a hyundai i20 or on another car, this operation is for experienced handymen. So let's look at what to do, point by point. We recommend that you take pictures at several stages to help you reassemble the new window regulator.

Removing a window regulator on a Hyundai i20

  • Remove the entire door trim. From the handle to the retro cover. This manipulation should be done rather delicately using a flat screwdriver. It will be necessary to make sure to have access to the window regulator at all points without being disturbed. This manipulation is the longest to perform.
  • Remove the window regulator seals from your hyundai i20. Again, it is wiser to do it carefully.
  • Now that you have access to the window regulator, disconnect the connectors. You can then take the motor out of the window regulator when it is stuck.
  • Take out all the clips that hold the window in place, then take out the window. It is sometimes advisable to position the window halfway up to be able to carry out this manipulation. Of course you have to be very careful when moving the window. It is best to put it on a rather thick sheet.
  • Remove the window regulator completely. It is wiser to hold on to your position. You can take a picture of it if it helps you attach the new window regulator. The window regulator is sometimes held by screws or rivets, they must therefore be removed.

The installation of an electric window regulator of a hyundai i20

  • Position the new window regulator. Make sure that its location is similar to the previous window regulator. You should definitely use the fasteners you put aside.
  • Reposition the glass in the same way as you removed it. At times it will be necessary to rotate it slightly so that it fits properly in its guide.
  • Connect the connectors.
  • Replace the seals you removed.
  • Refit all of the door trim.

It's good, you now have a new and working window regulator . You can therefore switch on the ignition and test it.