The advantage of an electric window regulator is undeniable compared to manual systems. However, it has the disadvantage of being much more complex in terms of repairs. Also, it is not necessarily easy to identify precisely the nature of the failure. In this article, we will see how to replace the electric window regulator of a Hyundai Ioniq . But before you start, you have to be sure you understand where the problem is coming from. Let's be clear, it is sometimes unnecessary to replace the entire window regulator, a simple repair can sometimes be enough. Whether it concerns an electrical short circuit, or just a lack of lubrication. Now that you've identified the source of the problem, let's get to the heart of the matter.change-window-lift-Hyundai-Ioniq

How to replace a Hyundai Ioniq window regulator

The replacement of a window regulator is rather long. Depending on your experience on the subject, count approximately three hours to make sure you don't get caught in the weather. Whether it is a Hyundai Ioniq or another car, this operation is for experienced DIY enthusiasts. So let's look at how to do it, step by step. It is advisable to take pictures at different times to help you mount the new window regulator.

Removing a window regulator on a Hyundai Ioniq

  • Dismantle the entire door trim. From the handle to the mirror cover. This should rather be done with care using a flat screwdriver. You must ensure that you have access to the window regulator at all points without being embarrassed. This step is quite long to perform.
  • Disassemble the window regulator seals from your Hyundai Ioniq. Again, it's wiser to do it delicately.
  • Now that you have accessed the window regulator, remove the connectors. You can then release the window lifter motor if it is stuck.
  • Take out all the fasteners that hold the glass, then take it out. It is sometimes preferable to position the window halfway up to be able to carry out this manipulation. Of course we will have to be very careful when moving the glass. It is advisable to place it on a sufficiently thick sheet.
  • Disassemble the window regulator entirely. It is wiser to remember your position. You can take a picture of it if it helps you fix the new window regulator. The window regulator is sometimes held in place by screws or rivets, so you must remove them.

The installation of an electric window regulator of a Hyundai Ioniq

  • Fit the new window regulator. Make sure that its location is similar to the damaged window regulator. You will probably have to use the clips you removed.
  • Reposition the glass as you removed it. It will sometimes be necessary to move it a little so that it fits properly in its guide.
  • Connect the connectors.
  • Replace the seals you removed.
  • Replace all of the door trim.

That's it, you now have a new and working window regulator . So you can put the ignition on and test it.