The advantage of an electric window regulator is huge compared to manual systems. However, it has the disadvantage of being much more complex in terms of repairs. In addition, it is not necessarily easy to identify precisely the origin of the failure. Here we will find out how to change the electric window regulator of a Hyundai Ix55 . But before seeing what to do next, you need to be sure you know where the problem is coming from. Let's be clear, from time to time it is unnecessary to replace the entire window regulator, a simple repair can sometimes work. Whether it concerns an electrical short circuit, or only a lack of lubrication. Now that you are sure what is causing the malfunction, let's get back to our topic.change-window-lift-Hyundai-Ix55

How to replace a Hyundai Ix55 window regulator

Replacing a window regulator is relatively tedious. Depending on your experience in the field, count approximately three hours to make sure you don't get caught up in the time. Whether on a Hyundai Ix55 or on another vehicle, this operation is for experienced DIY enthusiasts. So let's see how to do it, step by step. It is advisable to take pictures at different times in order to help you reassemble the new window regulator.

Removing a window regulator on a Hyundai Ix55

  • Remove the entire door trim. From the handle to the retro cover. This manipulation must be done relatively carefully with a flat screwdriver. It will be necessary to make sure to have access to the window regulator at all points without being hampered. This step is the longest to perform.
  • Remove the window regulator seals from your Hyundai Ix55. Again, it's important to go about it gently.
  • Now that you have access to the window regulator, remove the connectors. You must then remove the motor from the window regulator if it is blocked.
  • Release all of the clips that hold the glass in place, then remove the glass. It is sometimes more judicious to place the glass halfway up to perform this manipulation. Obviously you will have to be extremely careful when handling the glass. It is better to put it on a rather thick sheet.
  • Remove the window regulator entirely. It is important to remember your position well. You can take a picture of it if it can help you attach the new window regulator. The window regulator is from time to time held by screws or rivets, they must therefore be removed.

The installation of an electric window regulator of a Hyundai Ix55

  • Position the new window regulator. Make sure that its position is similar to the previous window regulator. You will probably have to use the fasteners you removed.
  • Reposition the glass just as you took it out. It will be necessary from time to time to make it move slightly so that it fits properly in its guide.
  • Reconnect the connectors.
  • Fit the seals that you have carefully removed.
  • Replace all of the door trim.

It's done, you now have a new and functional window regulator . You must therefore turn on your car and test it.