The advantage of an electric window regulator is undeniable compared to manual window regulators. However, it has the disadvantage of being much more complex in terms of repairs. In addition, it is not always easy to identify precisely the origin of the failure. Here we will see how to change the electric window regulator on a Hyundai Kona . But before you start, you need to be sure you understand where the failure came from. Indeed, it is sometimes unnecessary to replace the entire window regulator, a simple small repair can sometimes work. Whether it's a false contact, or simply a lack of lubrication. Now that you've identified the source of the concern, let's get back to our topic.change-window-Hyundai-Kona

Hyundai Kona window regulator replacement: how to do it

Replacing a window regulator is rather tedious. Depending on your expertise in the field, count approximately three hours to make sure you don't get caught up in the weather. Whether for a Hyundai Kona or on another vehicle, this manipulation is for experienced DIY enthusiasts. So let's take a look at how to do it, step by step. We recommend that you take pictures at different times to help you fit the new window regulator.

Removing a window regulator on a Hyundai Kona

  • Remove all of the door trim. From mirror cover to handle. This operation should be done rather gently using a flat screwdriver. You must ensure that you can access the window regulator at all points without being hindered. This manipulation is the longest to perform.
  • Remove the window regulator seals from your Hyundai Kona. Once again, it is essential to go about it with care.
  • Now that you have access to the window regulator, remove the connectors. You will then have to release the window lifter motor if it is stuck.
  • Take out all the clips that hold the window in place, then take out the window. It is sometimes preferable to position the window halfway up to carry out this operation. Of course, great care must be taken when moving the glass. It is advisable to put it on a rather thick sheet.
  • Remove the window regulator entirely. It is essential to remember your location. You can take a picture of it if it helps you fit the new window regulator. The window regulator is sometimes held by screws or rivets, they must therefore be removed.

The installation of an electric window of a Hyundai Kona

  • Present the new window regulator. Make sure that its position is similar to the previous window regulator. You may need to use the clips you removed.
  • Reposition the glass as you removed it. It will at times be necessary to make it move a little so that it fits correctly in its guide.
  • Connect the connectors.
  • Fit the seals you removed.
  • Replace all of the door trim.

It's done, you now have a new and functional window regulator . You will therefore have to switch on and test it.