The advantage of an electric window regulator is undeniable in comparison with manual systems. However, it has the disadvantage of being much more restrictive in terms of repairs. Also, it is not always easy to pinpoint the nature of the problem. In this article, we will see how to change the electric window regulator of a hyundai lantra . But before you see what to do, you have to be sure you understand where the problem is coming from. Indeed, it is sometimes unnecessary to change the entire window regulator, a simple repair will often work. Whether it's an electrical short circuit, or simply a lack of oil. Now that you've identified the source of the problem, let's get to the heart of the matter.change-window-regulator-hyundai-lantra

Replacing a window regulator for hyundai lantra: how to do it

The replacement of a window regulator is quite long. Depending on your experience on the subject, count about three hours to make sure you don't get caught in the weather. Whether for a hyundai lantra or another vehicle, this repair is for experienced DIY enthusiasts. So let's look at how to do it, step by step. We advise you to take pictures at several stages in order to help you mount the new window regulator.

Removing a window regulator on a hyundai lantra

  • Remove the entire door trim. From the handle to the mirror cover. This should be done very gently using a flat screwdriver. You must ensure that you access the window regulator at all points without being obstructed. This manipulation is quite long to perform.
  • Remove the window regulator seals from your hyundai lantra. Again, it is important to take it delicately.
  • Now that you have accessed the window regulator, disconnect the connectors. You can then remove the motor from the window regulator if it is stuck.
  • Release all the fasteners that hold the window, then remove the window. It is sometimes advisable to place the window halfway up to carry out this manipulation. Of course you will have to be very careful when moving the window. It is advisable to place it on a rather thick sheet.
  • Remove the window regulator entirely. It is important to remember its location. You can take a picture of it if it helps you fix the new window regulator. The window regulator is at times maintained by screws or rivets, it will therefore be necessary to remove them.

The installation of an electric window regulator of a hyundai lantra

  • Position the new window regulator. Make sure that its location is similar to the previous window regulator. You should definitely use the fasteners you removed.
  • Replace the glass in the same way as you removed it. At times it will be necessary to move it slightly so that it fits correctly in its guide.
  • Connect the connectors.
  • Fit the seals that you have carefully removed.
  • Reassemble the door trim assembly.

It's good, you now have a new and working window regulator . You can therefore turn on your car and test it.