The advantage of an electric window regulator is enormous compared to manual mechanisms. However, it has the disadvantage of being much more restrictive in terms of repairs. In addition, it is not necessarily easy to pinpoint the cause of the problem. In this article, we will see how to change the electric window regulator of a Hyundai Neos . But before you start, you need to be sure you understand where the problem is coming from. Indeed, it is from time to time unnecessary to change the entire window regulator, a simple repair will sometimes work. Whether it's an electrical short, or just a lack of lubrication. Now that you are sure of the source of the malfunction, let's get back to our topic.
How to replace a window regulator in Hyundai Neos
Changing a window regulator is relatively time-consuming. Depending on your expertise on the subject, count approximately two o'clock to make sure you have the time you need. Whether on a Hyundai Neos or on another vehicle, this operation is for experienced DIY enthusiasts. So let's take a look at how to do it, step by step. We advise you to take pictures at several stages in order to help you mount the new window regulator.
Removing a window regulator on a Hyundai Neos
- Remove all of the door trim. From the handle to the mirror cover. This should be done relatively gently using a flat screwdriver. You must ensure that you access the window regulator at all points without being obstructed. This manipulation is quite long to perform.
- Disassemble the window regulator seals from your Hyundai Neos. Again, it is wiser to do it carefully.
- Now that you have access to the window regulator, remove the connectors. You must then release the window lifter motor when it is stuck.
- Remove all the fasteners that hold the glass, then release it. It is from time to time more advisable to position the window halfway up to be able to carry out this operation. Obviously we will have to be very careful when handling the glass. It is advisable to place it on a rather thick sheet.
- Disassemble the window regulator completely. It is wiser to remember its location. You can take a picture of it if it helps you to install the new window regulator. The window regulator is occasionally held in place by screws or rivets, so you will need to remove them.
The installation of an electric window regulator of a Hyundai Neos
- Present the new window regulator. Make sure that its position is identical to the previous window regulator. You will certainly need to use the fasteners you removed.
- Replace the glass as you removed it. It will be necessary from time to time to rotate it slightly so that it fits correctly in its guide.
- Connect the connectors.
- Replace the seals you removed.
- Replace all of the door trim.
It's good, you now have a new and functional window regulator . So you have to put the ignition on and test it.