The advantage of an electric window regulator is substantial in comparison with manual mechanisms. However, it has the defect of being much more complex in terms of repairs. Also, it is not always easy to identify precisely the nature of the problem. With this article, we will see how to repair the electric window regulator of a Hyundai Olv . But before you start, you need to be sure you understand where the malfunction is coming from. Indeed, it is from time to time unnecessary to replace the entire window regulator, a simple small repair will sometimes suffice. Whether it's a false contact, or simply a lack of lubrication. Now that you are sure of the source of the problem, let's get to the heart of the matter.
How to replace a Hyundai Olv window regulator
The replacement of a window regulator is rather long. Depending on your experience on the subject, plan about two o'clock to make sure you have the time you need. Whether on a Hyundai Olv or another car, this manipulation is for experienced DIY enthusiasts. So let's see how to do it, step by step. We advise you to take pictures at several stages to help you mount the new window regulator.
Removing a window regulator on a Hyundai Olv
- Remove the entire door trim. From the mirror cover to the handle. This should rather be done with care using a flat screwdriver. It will be necessary to ensure access to the window regulator at any point without being disturbed. This step is the longest to complete.
- Remove the window regulator seals from your Hyundai Olv. Again, it is wiser to take it delicately.
- Now that you have accessed the window regulator, disconnect the connectors. You must then remove the motor from the window regulator if it is blocked.
- Remove all the fasteners that hold the glass, then release it. It is from time to time more judicious to position the window halfway up to carry out this manipulation. Of course we will have to be extremely careful when moving the glass. It is best to put it on a rather thick sheet.
- Remove the window regulator as a whole. It is wiser to remember its location. You can take a picture of it if it helps you fix the new window regulator. The window regulator is occasionally held in place by screws or rivets, so they must be removed.
The installation of an electric window regulator of a Hyundai Olv
- Introduce the new window regulator. Make sure that its position is similar to the damaged window lifter. You will probably have to use the fasteners that you have put aside.
- Reposition the glass as you removed it. It will be necessary from time to time to make it move slightly so that it fits correctly in its guide.
- Connect the connectors.
- Fit the seals that you have carefully removed.
- Refit the entire door trim.
That's it, you now have a new and working window regulator . You will have to put the ignition on and test it.