The advantage of an electric window regulator is substantial compared to manual window regulators. On the other hand, it has the drawback of being much more restrictive in terms of repairs. In addition, it is not necessarily easy to determine precisely the nature of the problem. With this article we will find out how to change the electric window of a Hyundai Pony . But before you can see what to do next, you need to be sure you know where the problem is coming from. Indeed, it is regularly unnecessary to replace the entire window regulator, a simple repair will sometimes work. Whether it concerns a false contact, or just a lack of oiling. Now that you've identified the cause of the malfunction, let's get to the heart of the matter.change-window-Hyundai-Pony

Hyundai Pony window regulator replacement: how to do it

Changing a window regulator is quite time consuming. Depending on your expertise on the subject, count approximately three hours in order to be sure that you have the necessary time. Whether on a Hyundai Pony or on another car, this operation is for experienced DIY enthusiasts. So let's see what to do, point by point. We recommend that you take a photo at different times to help you reassemble the new window regulator.

Removing a window regulator on a Hyundai Pony

  • Remove the entire door trim. From mirror cover to handle. This manipulation must be done carefully enough with a flat screwdriver. It will be necessary to make sure to have access to the window regulator at all points without being disturbed. This manipulation takes quite a long time to perform.
  • Remove the window regulator seals from your Hyundai Pony. Once again, it is essential to do it delicately.
  • Now that you have accessed the window regulator, remove the connectors. You will then have to remove the motor from the window regulator if it is ever stuck.
  • Remove all the fasteners that hold the glass in place, then remove the glass. It is regularly better to position the window halfway up in order to be able to carry out this manipulation. Of course, extreme care must be taken when handling the glass. It is best to place it on a sufficiently thick sheet.
  • Disassemble the window regulator completely. It is essential to retain your position. You can take a picture of it if it helps you attach the new window regulator. The window regulator is regularly held by screws or rivets, you must therefore remove them.

The installation of an electric window of a Hyundai Pony

  • Present the new window regulator. Make sure that its location is similar to the previous window regulator. You will probably need to use the fasteners you put aside.
  • Reposition the glass the same way you took it out. It will regularly be necessary to rotate it a little so that it fits correctly in its guide.
  • Connect the connectors.
  • Fit the seals that you have carefully removed.
  • Replace the entire door trim.

It's done, you now have a new and functional window regulator . You will therefore have to turn on your car and test it.