The advantage of an electric window regulator is substantial in comparison with manual mechanisms. However, it has the disadvantage of being much more restrictive in terms of repairs. Also, it is not necessarily easy to determine precisely the cause of the failure. In this article, we will discover how to change the electric window regulator of a Hyundai Portico . But before you start, be sure you know where the problem is coming from. Indeed, it is from time to time unnecessary to change the entire window regulator, a simple repair can often work. Whether it concerns an electrical short circuit, or simply a lack of lubrication. Now that you know the source of the problem, let's get to the heart of the matter.
How to replace a window regulator in Hyundai Portico
Changing a window regulator is rather tedious. Depending on your expertise on the subject, plan approximately two o'clock to make sure you don't get caught up in time. Whether for a Hyundai Portico or another vehicle, this repair is for experienced DIY enthusiasts. So let's take a look at how to do it, step by step. We advise you to take pictures at different times to help you install the new window regulator.
Removing a window regulator on a Hyundai Portico
- Dismantle the entire door trim. From the mirror cover to the handle. This should be done very gently using a flat screwdriver. You will have to make sure you have access to the window regulator at all points without being embarrassed. This step is the longest to execute.
- Remove the window regulator seals from your Hyundai Portico. Again, it is crucial to do it delicately.
- Now that you have accessed the window regulator, disconnect the connectors. You must then remove the motor from the window regulator if it is blocked.
- Remove all the fasteners that hold the glass, then remove the glass. It is from time to time more advisable to position the window halfway up to carry out this operation. Of course, great care must be taken when moving the glass. It is best to put it on a sufficiently thick sheet.
- Remove the window regulator as a whole. It is essential to remember your position. You can take a picture of it if it helps you fix the new window regulator. The window regulator is occasionally held by screws or rivets, it will therefore be necessary to remove them.
The installation of an electric window regulator of a Hyundai Portico
- Position the new window regulator. Make sure that its location is identical to the previous window regulator. You should certainly use the fasteners you have removed.
- Reposition the glass just as you took it out. It will be necessary from time to time to make it move a little so that it fits properly in its guide.
- Connect the connectors.
- Replace the seals you removed.
- Replace all of the door trim.
It's good, you now have a new and functional window regulator . You must therefore switch on the ignition and test it.