The advantage of an electric window regulator is substantial in comparison with manual systems. However, it has the disadvantage of being much more complicated in terms of repairs. In addition, it is not necessarily easy to pinpoint the source of the problem. Here we will see how to repair the electric window regulator of a hyundai terracan . But before you start, be sure you know where the fault is coming from. Let's be clear, it is sometimes unnecessary to change the entire window regulator, a simple repair can sometimes work. Whether it's a false contact, or simply a lack of lubrication. Now that you are sure of the nature of the malfunction, let's get back to our topic.change-window-regulator-hyundai-terracan

Replacing a window regulator from hyundai terracan: how to do it

Changing a window regulator is quite time consuming. Depending on your experience on the subject, count about three hours to make sure you don't get caught up in time. Whether it is for a Hyundai Terracan or on another vehicle, this manipulation is for experienced DIY enthusiasts. So let's take a look at what to do, step by step. We advise you to take photos at several stages in order to help you reassemble the new window regulator.

Removing a window regulator on a Hyundai Terracan

  • Remove the entire door trim. From the mirror cover to the handle. This should be done with enough caution using a flat screwdriver. It will be necessary to ensure access to the window regulator at any point without being obstructed. This step is the longest to execute.
  • Disassemble the window regulator seals from your Hyundai Terracan. Again, it is essential to do this with care.
  • Now that you have accessed the window regulator, disconnect the connectors. You can then release the window lifter motor when it is blocked.
  • Take out all the clips that hold the glass, then take it out. It is sometimes advisable to place the window halfway up to be able to carry out this operation. Obviously we will have to be extremely careful when moving the glass. It is best to place it on a sufficiently thick sheet.
  • Disassemble the window regulator completely. It is essential to memorize your location. You can take a picture of it if it helps you fix the new window regulator. The window regulator is sometimes held by screws or rivets, it will thus be necessary to remove them.

The installation of an electric window regulator of a Hyundai Terracan

  • Present the new window regulator. Make sure that its location is identical to the damaged window regulator. You will probably have to use the fasteners you have set aside.
  • Reposition the glass just as you removed it. It will sometimes be necessary to rotate it slightly so that it fits correctly in its guide.
  • Connect the connectors.
  • Replace the seals that you have carefully removed.
  • Refit the entire door trim.

That's it, you now have a new and functional window regulator . So you can switch on and test it.