The advantage of an electric window regulator is significant compared to manual window regulators. However, it has the disadvantage of being much more complex in terms of repairs. Also, it is not necessarily easy to pinpoint the origin of the fault. Here we will see how to replace the electric window regulator of a hyundai tucson . But before seeing the procedure to follow, you must be sure to know where the problem comes from. Let's be clear, it is sometimes unnecessary to change the entire window regulator, a simple repair will sometimes work. Whether it concerns a false contact, or just a lack of lubrication. Now that you've identified the source of the concern, let's get to the heart of the matter.change-window-regulator-hyundai-tucson

Replacing a window regulator from hyundai tucson: how to do it

The replacement of a window regulator is rather long. Depending on your expertise in the field, plan approximately three hours to make sure you have the time you need. Whether for a Hyundai Tucson or another vehicle, this repair is for experienced DIY enthusiasts. So let's take a look at what to do, step by step. It is advisable to take photos at several stages to help you assemble the new window regulator.

Removing a window regulator on a Hyundai Tucson

  • Remove all of the door trim. From the handle to the mirror cover. This should be done rather gently using a flat screwdriver. You must ensure that you have access to the window regulator at all points without being obstructed. This manipulation is the longest to execute.
  • Disassemble the window regulator seals from your hyundai tucson. Again, it is crucial to do it carefully.
  • Now that you have access to the window regulator, disconnect the connectors. You can then remove the motor from the window regulator if it is stuck.
  • Release all the fasteners that hold the window, then take it out. It is sometimes advisable to place the window halfway up to carry out this manipulation. Of course, extreme care must be taken when moving the glass. It is advisable to place it on a sufficiently thick sheet.
  • Disassemble the window regulator entirely. It is essential to remember its location. You can take a picture of it if it helps you fix the new window regulator. The window regulator is at times held by screws or rivets, so they must be removed.

The installation of an electric window regulator of a Hyundai Tucson

  • Present the new window regulator. Make sure that its position is similar to the previous window regulator. You will probably have to use the fixings that you removed.
  • Replace the glass just as you removed it. At times it will be necessary to rotate it a little so that it fits properly in its guide.
  • Connect the connectors.
  • Fit the seals you removed.
  • Refit all of the door trim.

It's done, you now have a new and working window regulator . So you can switch on and test it.