The advantage of an electric window regulator is substantial compared to manual systems. However, it has the disadvantage of being much more restrictive in terms of repairs. Also, it is not necessarily easy to pinpoint the source of the problem. In this article, we will see how to replace the electric window regulator of a Hyundai Veloster . But before you start, you have to be sure you understand where the dysfunction is coming from. Let us be clear, it is regularly useless to replace the whole window regulator, a simple small repair can sometimes be enough. Whether it's an electrical short circuit, or just a lack of oil. Now that you are sure of the source of the problem, let's get to the heart of the matter.change-window-lift-Hyundai-Veloster

How to replace a window regulator in Hyundai Veloster

Replacing a window regulator is rather tedious. Depending on your expertise in the field, count approximately three hours to make sure you don't get caught up in time. Whether on a Hyundai Veloster or another car, this operation is for experienced DIY enthusiasts. So let's see what to do, step by step. We advise you to take pictures at different times to help you mount the new window regulator.

Removing a window regulator on a Hyundai Veloster

  • Remove the entire door trim. From the handle to the mirror cover. This should rather be done with care with a flat screwdriver. You must ensure that you have access to the window regulator at all points without being embarrassed. This manipulation is the longest to execute.
  • Disassemble the window regulator seals from your Hyundai Veloster. Again, it is essential to do it delicately.
  • Now that you have access to the window regulator, remove the connectors. You must then remove the motor from the window regulator if it is blocked.
  • Release all the fasteners that hold the window, then release it. It is regularly advised to position the window halfway up to carry out this manipulation. Of course you will have to be very careful when handling the glass. It is best to put it on a rather thick sheet.
  • Disassemble the window regulator entirely. It is essential to remember its location. You can take a picture of it if it helps you to install the new window regulator. The window regulator is regularly held in place by screws or rivets, which will have to be removed.

The installation of an electric window regulator of a Hyundai Veloster

  • Fit the new window regulator. Make sure that its position is similar to the damaged window lifter. You will certainly have to use the fasteners that you have set aside.
  • Replace the glass as you removed it. It will regularly be necessary to rotate it slightly so that it fits correctly in its guide.
  • Reconnect the connectors.
  • Fit the seals you removed.
  • Reassemble the door trim assembly.

That's it, you now have a new and working window regulator . So you have to turn on your car and test it.